Are you looking for a simple way to improve your car’s fuel economy and reduce your carbon footprint? The EcoOBD2 Benzine Economy Fuel Saver chip tuning box is marketed as a plug-and-play device that can do just that. This device promises to optimize your car’s fuel consumption by simply plugging into your vehicle’s OBD2 port. Let’s delve into what EcoOBD2 is, how it claims to work, and whether it lives up to the hype of being an effective fuel-saving solution.
What is the EcoOBD2 Benzine Fuel Saver?
The EcoOBD2 is a chip tuning box designed to enhance fuel efficiency in gasoline (benzine) engine vehicles. It’s advertised as an easy-to-use device that you can install yourself without any special tools or mechanical knowledge. The core idea behind the EcoOBD2 benzine economy fuel saver is to optimize your car’s engine control unit (ECU) settings to reduce fuel consumption. The manufacturer claims that by plugging this device into your car’s OBD2 port, you can achieve noticeable fuel savings and contribute to lower emissions. It’s designed to be compatible with all cars manufactured from 1996 onwards that have an OBD2 port.
How Does the EcoOBD2 Claim to Work?
The EcoOBD2 operates by tapping into your car’s On-Board Diagnostics II (OBD2) system. Once plugged into the OBD2 port, the Eco Obd2 Benzine Economy Fuel Saver starts communicating with your car’s ECU. According to the product description, it works by “remapping” the car’s computer. This remapping process is said to occur over approximately 200 kilometers (150 miles) of driving as the device learns your driving habits. It then supposedly adjusts parameters such as boost pressure, fuel injection timing, and fuel quantity to create a new map in the ECU focused on fuel economy.
The device claims to continuously refine this map as you drive, adapting to your driving style and further optimizing fuel consumption over time. It emphasizes that it operates within the engine’s tolerances and doesn’t exceed manufacturer’s requirements, ensuring no damage to the engine or ECU. A key selling point is its reversibility; unplugging the EcoOBD2 benzine economy fuel saver supposedly returns the car to its factory settings.
Benefits of Using the EcoOBD2 Fuel Saver
The primary advertised benefit of the EcoOBD2 benzine economy fuel saver is improved fuel economy. The manufacturer suggests potential fuel savings of up to 15%. Beyond fuel savings, the device also promotes itself as a means to reduce emissions, contributing to a more environmentally friendly operation of your vehicle.
Furthermore, the EcoOBD2 is marketed for its ease of use. The plug-and-drive installation is designed for anyone to install it without needing professional assistance. The device is also presented as a safer and more affordable alternative to traditional ECU remapping, which often requires professional tuning and is a permanent modification. The removable nature of the EcoOBD2 is highlighted as an advantage, allowing users to easily revert to stock settings if desired.
Installation and Calibration of the EcoOBD2
Installing the EcoOBD2 benzine economy fuel saver is presented as a straightforward process:
- Turn off the ignition and remove the car key. This ensures safety during installation.
- Locate the OBD2 connector in your car. (See the diagram below for typical locations).
- Plug the EcoOBD2 into the OBD2 connector. Ensure it’s firmly connected.
- Insert the key into the ignition and turn it to the first stage (accessory mode – do not start the engine).
- Press the reset button on the EcoOBD2 for about 5 seconds.
- Wait for 30-54 seconds. This allows the EcoOBD2 to establish communication with the ECU.
- Start the engine.
- Drive as usual. The EcoOBD2 will automatically begin to learn your driving habits and optimize fuel consumption over the next 200 km (150 miles).
Typical OBD2 Connector Locations in Cars
OBD2 Port Compatibility: Is Your Car Compatible?
OBD2 (On-Board Diagnostics II) is a standardized system required in most modern cars. It became mandatory in:
- USA: For cars sold after January 1, 1996.
- European Union: For cars sold after January 1, 2001.
- European Union: For diesel engine cars sold after January 1, 2003.
If your car falls within these dates, it is highly likely to have an OBD2 port. The OBD2 port is typically located within the car’s cabin, often under the dashboard on the driver’s side. Refer to the image above and the location list provided to help you find the OBD2 port in your vehicle.
Common OBD2 Port Locations by Car Brand:
- Driver’s side, underneath dashboard, in the area under the steering column: Acura, Buick, Chevrolet, Dodge, Pontiac, Saab, Subaru, Toyota, Volkswagen, Volvo
- Driver’s side, underneath dashboard, between the driver-side door and steering column area: Aston Martin, BMW, Cadillac, Chrysler, Daewoo, Dacia, Dodge, Fiat, Ford, Geely, GMC, Honda, Hyundai, Infiniti, Isuzu, Jeep, Kia, Land Rover, Lexus, Mazda, Mercedes Benz, Mini, Nissan, Peugeot, Porsche, Renault, Rolls-Royce, Opel, Ssangyong, Seat, Skoda, Suzuki, Toyota, Volkswagen, Volvo
- Driver’s side, underneath dashboard, between the steering column area and the center console: Acura, Buick, Chevrolet, Chrysler, Ferrari, Ford, Honda, Isuzu, Jaguar, Lamborghini, Mazda, Mercedes Benz, Mini, Opel, Saab, Ssangyong, Seat, Skoda, Toyota, Volkswagen
Note: This is not an exhaustive list, and the exact location can vary depending on the specific model and year of your car. Always consult your car’s manual for the definitive OBD2 port location.
Conclusion: Considering the EcoOBD2 Benzine Fuel Saver
The EcoOBD2 benzine economy fuel saver presents itself as a user-friendly and cost-effective method to potentially improve your car’s fuel economy and reduce emissions. Its plug-and-play design and reversible nature make it an appealing option for drivers seeking simple modifications. If you are interested in exploring ways to save fuel, the EcoOBD2 offers a readily accessible solution that warrants further investigation and consideration based on your specific vehicle and driving needs.
