Keeping your Cen-Tech OBD2 Scanner 60794 updated is crucial for optimal performance and access to the latest features. This guide provides a clear, step-by-step process to ensure your scanner is running the most current software. Regularly updating your scanner ensures compatibility with newer vehicles and diagnostic protocols, allowing you to effectively troubleshoot and maintain your car.
Here’s how to update your Cen-Tech OBD2 Scanner 60794:
Preparing for the Update
Before initiating the update process for your Cen-Tech scanner, you’ll need to download the necessary software update package and install the Maxilink II tool on your computer.
-
Download the Software Update Package:
- Navigate to the Harbor Freight website, a reliable source for Cen-Tech updates, or directly use this link: http://images.harborfreight.com/hftweb/softwareupdates/60794.zip.
- Download the zipped software update package to a memorable location on your computer. Note the folder name and location for easy access later.
- Extract the contents of the downloaded ZIP file using software like WinRAR. Choose a destination folder for the unzipped files and remember this location as well.
-
Install Maxilink II Software:
- Locate the Maxilink II setup software. This is typically included on a CD that comes with your Cen-Tech scanner.
- Install Maxilink II on your computer.
- Once installed, run the Maxilink Tool Kit. The Maxilink II software window should then open, ready for the next steps.
Updating Your Cen-Tech Scanner
With the preparatory steps completed, you can now proceed with updating your Cen-Tech OBD2 Scanner 60794 using the Maxilink II software and a USB connection.
-
Connect Scanner to Computer:
- Use the provided USB cable to connect your Cen-Tech scanner to your computer.
-
Enter Update Mode on Scanner:
- On your Cen-Tech scanner, use the navigation buttons to select “Setup”.
- Within the Setup menu, find and select “Update Mode”.
- Press “OK” on your scanner to confirm and enter update mode.
- Check the Maxilink II window on your computer. The status bar in the upper right corner should turn green, indicating a successful connection and readiness for update.
-
Select Scanner Model in Maxilink II:
- In the Maxilink II window, locate the left side panel where scanner models are listed.
- Select the model number corresponding to your device, which is SKU 60794.
-
Select Update File:
- Under the “Update Program” pane in the Maxilink II window, click on the “Select File” button.
- Browse to the folder where you unzipped the software update package.
- Choose the file with the “.bin” extension. This is the software update file you downloaded earlier.
-
Initiate the Update:
- Click the “Update” button in the Maxilink II window to start the software update process.
- A progress message will appear on both your computer screen and the Cen-Tech scanner.
- Important: Do not disconnect the scanner, turn off either the scanner or the computer, or interrupt the update process in any way.
-
Completion and Reboot:
- Once the update is complete, a confirmation message will be displayed on the scanner screen, indicating a successful update.
- Power off your Cen-Tech scanner.
- Power it back on to finalize the update process. Your Cen-Tech OBD2 Scanner 60794 is now updated and ready for use.
If you encounter any technical difficulties during the update process, or have further questions, please contact technical support at 1-800-444-3353 for assistance. Keeping your Cen-Tech OBD2 scanner software up to date ensures you have the best diagnostic tool for your vehicle.
