Features:
The Vgate iCar Pro Bluetooth OBD2 scanner is a powerful and user-friendly tool designed to help you understand your car’s health. This device reads diagnostic trouble codes, both generic and manufacturer-specific, and displays their meanings, drawing from a database of over 3000 generic code definitions. Beyond just reading codes, it empowers you to clear trouble codes and turn off the annoying MIL (“Check Engine” light) on your dashboard.
With the Vgate iCar Pro, you can monitor a wide range of real-time engine parameters, providing valuable insights into your vehicle’s performance. These parameters include:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel Pressure
100% Original iCar Pro Connection Methods:
The Vgate iCar Pro offers versatile connection options to suit your devices:
- Bluetooth 3.0 for Android
- Bluetooth 4.0 for Android and iOS
- WiFi for Android and iOS
Broad OBD-II Protocol Support:
The Vgate iCar Pro OBD II adapter is engineered to be compatible with a wide range of vehicles, supporting all major OBD-II protocols, ensuring it works with most modern cars:
- SAE J1850 PWM (41.6 Kbaud)
- SAE J1850 VPW (10.4 Kbaud)
- ISO9141-2 (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (fast init, 10.4 Kbaud)
- ISO15765-4 CAN (11bit ID, 500 Kbaud)
- ISO15765-4 CAN (29bit ID, 500 Kbaud)
- ISO15765-4 CAN (11bit ID, 250 Kbaud)
- ISO15765-4 CAN (29bit ID, 250 Kbaud)
- SAE J1939 CAN (29bit ID, 250 * Kbaud)
- USER1 CAN (11 * bit ID, 125 * Kbaud)
- USER2 CAN (11 * bit ID, 50 * kbaud)
Effortless Connection Guide:
For iOS Users: Simply enable Bluetooth on your iOS device and configure the Bluetooth device name within your OBD app settings. No pairing is needed directly through iOS Bluetooth settings.
For Android Users: Choose the “ANDROID-VLINK” name when connecting. (Note: Both “IOS-VLINK” and “ANDROID-VLINK” may appear, but select “ANDROID-VLINK”).
Low Energy Consumption & Automatic Sleep/Wake:
The Vgate iCar Pro is designed for efficiency. It features ultra-low power consumption and automatically enters sleep mode after 30 minutes of engine inactivity, preventing battery drain. (Note: Automatic Start/Sleep function may not be supported on electric vehicles).
- Automatic Start: iCar Pro automatically powers on when your car starts.
- Automatic Sleep: iCar Pro goes to sleep 30 minutes after the engine is turned off.
Online Firmware Updates:
Keep your Vgate iCar Pro up-to-date with the latest features and improvements through online firmware updates. (Important: Firmware upgrades are not available for pirated versions).
Package Includes:
- 1 x Vgate iCar Pro BLE4.0 OBDII adapter
- 1 x User manual
