As an Audi enthusiast, you’re likely always looking for ways to enhance your driving experience and personalize your vehicle. One of the most powerful tools at your disposal is VCDS (VAG-COM Diagnostic System), an OBD2 diagnostic software that allows you to tap into your Audi’s hidden potential. Using VCDS, you can perform a wide array of modifications, often referred to as “mods” or “tweaks,” to customize various aspects of your car’s behavior and features.
This comprehensive guide, tailored specifically for Audi owners, delves into a range of popular and practical VCDS modifications. We’ve compiled a detailed list of tweaks you can easily implement using your VCDS cable and software, allowing you to tailor your Audi to your exact preferences. From subtle convenience enhancements to more noticeable performance-related adjustments, the possibilities with Audi Obd2 Vcds are vast.
Below, you’ll find a categorized compilation of VCDS mods for your Audi. Each modification includes clear, step-by-step instructions, making it easy even for those new to VCDS coding to follow along. Remember to always exercise caution when making changes to your car’s settings and double-check each step to ensure accuracy. Let’s dive in and explore the world of Audi VCDS modifications!
Convenience & Comfort Modifications
These modifications focus on enhancing the everyday usability and comfort of your Audi.
Disable Windscreen Wiper After-Wipe
Annoyed by that extra wiper sweep after you’ve already cleaned your windshield? This mod disables the after-wipe feature for a cleaner, single swipe.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> [Dropdown] -> "x ** 8K1 955 119 ** WWS xxxx" -> Long Coding Helper -> Byte 1 Bit 3 - Remove check mark (1 = active)Disable Key Warning (Keyless Models)
For keyless entry Audi models, this tweak removes the key warning message, offering a more streamlined experience.
VCDS Code:
[46 – Central Conv.] [Coding - 07] -> Long Coding Helper -> Byte 9 Bit 7 set to 0 (Uncheck)Disable “Lights Are On” Warning
If you frequently leave your lights on intentionally, this modification disables the audible warning when you open the driver’s door.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 5 Bit 3 - Set to 0 to disable "lights are on" warning when you open the door.Disable NAV & Phone Warning Messages at Speed
Eliminate the persistent warning messages when inputting navigation or phone data while driving. Use responsibly and prioritize safe driving.
VCDS Code:
[5F - Information Electr.] -> Adaptation -> Set channel 2 & 3 to 250Disable Seatbelt Chime
For off-road or track use where seatbelts might be temporarily unbuckled at low speeds, you can disable the seatbelt chime. Always ensure seatbelts are used during normal driving conditions for safety.
VCDS Code:
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 0 Bit 2-4 – Seat Belt Warning inactiveEnable Ambient Interior Lighting Control
Unlock control over your Audi’s ambient interior lighting through the MMI (Multi Media Interface) for personalized cabin ambiance.
VCDS Code:
[Hidden menu] [car] [carmenuoperation] [interior light] Set to 5
[Hidden menu] [car] [cardevicelist] [interior light] Enable
Reset MMIEnable Automatic Gear Selection in DIS
Display the selected gear (D or S) in your Driver Information System (DIS) for clearer gear indication.
VCDS Code:
[02 – Auto Trans] [Adaptation – 10] Select “Single Gear Display” from top channel drop down menu
Select “D on/S on” from New value drop down menuEnable Automatic Hill Hold Assist ‘Lite’
Enhance your hill hold assist functionality with a “lite” version for smoother starts on inclines.
VCDS Code:
[03 - ABS brakes][Security Access - 16] (Enter code presented by program)
[Coding – 07] -> Long Coding Helper -> Byte 1 Bit 6 set to 1 to enable hill hold assist.Enable Auxiliary Ventilation
Activate the auxiliary ventilation system to circulate fresh air within the cabin, improving comfort in various conditions.
VCDS Code:
[5F - Information Electr.] [Coding - 07] -> Long Coding Helper -> Byte 6 Bit 1 – Set to 1
[Hidden menu] [car] [cardevicelist] [Auxiliary heating] Enable
[08 - Auto HVAC] [Coding - 07] -> Long Coding Helper -> Byte 1 Bit 3 – Set to 1
[08 - Auto HVAC] [Coding - 07] -> Long Coding Helper -> Byte 1 Bit 4 – Set to 1Enable Battery Meter
Monitor your Audi’s battery voltage directly through the MMI or radio display for proactive battery management.
VCDS Code:
[Hidden menu] [car] [cardevextdevicelist] [Battery] Enable
[Hidden menu] [car] [carmenuoperation] [Battery] Set to 5
Reset MMI
OR
[56 - Radio] -> Adaption -> Channel 39, add 16 to your valueEnable DIS Efficiency Program (MY2010+)
For newer Audi models, enable the Efficiency Program within the DIS to provide driving efficiency feedback.
VCDS Code:
[17 - Instruments] [Adaptation - 10] -> Channel 77 change 0 to 255Enable Double Disarm Beep
Get audible confirmation with a double beep when disarming your Audi, providing extra security feedback.
VCDS Code:
[46 - Central Conv.] [Adaptation - 10] -> Channel 63 Add 4Enable DRL Selectable via MMI
Gain the ability to control your Daytime Running Lights (DRL) settings directly through the MMI for on-demand customization.
VCDS Code:
[09 – Cent. Elect.] -> [Coding – 07] -> Long Coding Helper -> Byte 3 Bit 5 set to 1Enable Remote Operation Windows and Sunroof
Conveniently control your windows and sunroof remotely using your key fob for ventilation or closing them from a distance.
VCDS Code:
[46 - Cent. Conv.] [Coding - 07] -> [Long Coding Helper] Byte 2 Bit 2 - Set to 1Enable Release Parking Brake Without Brake Pedal
For added convenience in certain situations, you can enable releasing the electronic parking brake without needing to press the brake pedal.
VCDS Code:
[53 - Parking Brake][Security Access - 16] (Enter code presented by program)
[Adaptation - 10] -> Channel 4 Set to 0Enable Release Parking Brake Without Seatbelt
Similar to the above, this mod allows parking brake release without the seatbelt engaged, useful in specific low-speed maneuvers. Always prioritize seatbelt use during normal driving.
VCDS Code:
[53 - Parking Brake][Security Access - 16] (Enter code presented by program)
[Adaptation - 10] -> Channel 7 Set to 0Enable Reverse Mirror Tilt
Enhance visibility when reversing by enabling the passenger side mirror to automatically tilt downwards, showing the curb.
VCDS Code:
[52 Door Elect, Pass.] -> [Coding - 07] -> [Long Coding Helper] -> Byte 4 Bit 4 and Bit 2 set to 1Enable Speed Display in MMI
Display your current speed digitally within the MMI screen for an alternative speedometer readout. May not work on NAV-equipped models.
VCDS Code:
[56 - Radio] [Adaptation - 10] -> Channel 02, Set to 1Enable TPMS (Tire Pressure Monitoring System)
If your Audi has the necessary ABS unit (1AT), you can enable the Tire Pressure Monitoring System for added safety and tire maintenance.
VCDS Code:
[Hidden menu] [car] [cardevicelist] [RDK] Enable
[Hidden menu] [car] [carmenuoperation] [Tires Air Pressure Control] Set to 5
[03 - ABS Brakes] [Security Access - 16] (probably with login code: 61378)
[Coding - 07] -> Long Coding Helper -> Byte 1 Bit 3 - Tire Pressure Monitoring (PR-7K6) active (1 = active)
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 4 Bit 0 - Tire Pressure Monitoring (TPMS) installed (1 = active)
Reset MMILighting Modifications
Customize your Audi’s lighting behavior for a unique look and enhanced functionality.
Disable Amber Corner Lights & Side Markers
For a cleaner, European look, disable the amber corner lights and side markers often found on US-spec vehicles.
VCDS Code (Corner Lights):
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10 Submodule 0 Bit 3 - Set to 0 to disable amber side markers (U.S. vehicles)Disable Amber Side Markers
Specifically target the amber side markers for deactivation while retaining corner lights if desired.
VCDS Code (Side Markers):
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10 Submodule 0 Bit 3 - Set to 0 to disable amber side markers (U.S. vehicles)Disable LED ‘Wink’ on Turn Signal
Prevent the LED DRL strip from dimming or “winking” when the turn signal is activated, maintaining consistent brightness.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 3 Bit 2 - LEDs remain at full brightness with parking lights (1 = active)
Byte 3 Bit 7 - Turn off LED-strip DRLs with indicators (1 = active)Enable Adaptive Brake Lights
Activate the adaptive brake light function, which causes brake lights to flash rapidly during hard braking for increased visibility to following drivers.
VCDS Code:
[46 - Comfort System] [Coding - 07] -> Long Coding Helper -> Byte 8 Bit 0 – Emergency Brake Flashing via Turn Lights active (1 = active)
Byte 8 Bit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)Enable DRL (Daytime Running Lights)
If your Audi doesn’t have DRLs enabled from the factory, you can activate them through VCDS and choose which lights to use as DRLs (LEDs, Fogs, High Beams, etc.).
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 1 = DRL via Front Side markers
Bit 2 = DRL via High Beams
Bit 3 = DRL via Fogs
Bit 4 = DRL via LEDs
Bit 6 = DRL via Side markers
Bit 7 = DRL via Tail lightsEnable Euro Parking Lights
Activate the European-style parking lights, which illuminate the front and rear lights on one side of the car when parked at night with the turn signal engaged.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 9 Bit 0 - Set to 1Enable Fog Lights as Cornering Lights
Program your fog lights to activate as cornering lights, illuminating the side of the road when turning at lower speeds for improved visibility.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4 Bit 0 - Check the box or change :Bit 0 set to 1Enable Front Turn Signals as Parking Lights
Utilize your front turn signals as additional parking lights for a unique lighting signature.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10 Bit 0- Check the box or change :Bit 0 to 1
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2 Bit 6 - Check the box or change :Bit 0 set to 1 (for DRL function)Enable LEDs Remain Bright for Parking Lights
Ensure your LED DRLs maintain their full brightness even when used as parking lights, for a more consistent look.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 3 Bit 2 - LEDs remain at full brightness with parking lights (1 = active)Enable Rear Tail Lights with DRLs
Have your rear tail lights illuminate along with the DRLs for increased visibility from the rear, even during daytime driving.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2 Bit 7 - DRL's via Tail Lets Active (1 = Active)Performance & Display Modifications
These tweaks allow you to access performance data and customize vehicle displays.
Enable Gauge Test/Needle Sweep
Enjoy the visually appealing gauge test or needle sweep upon starting your Audi, where the instrument needles sweep across the gauges.
VCDS Code:
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 1 Bit 0 - Check the box for "Gauge Test/Needle Sweep active"Enable Lap Timer
Unlock the lap timer function within your DIS, allowing you to record lap times for track days or spirited drives.
VCDS Code:
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 1 Bit 3 - Check the box for "Lap Timer active"Enable VIM (Video In Motion) on MMI
Use responsibly and be aware of legal restrictions. Video In Motion allows video playback on your MMI screen to continue even while the vehicle is moving.
VCDS Code:
[5F - Information Electr.] [Advanced ID - 1A] Note 1st Serial number
[Security Access] Enter Digits 6, 13, 10, 14, 11 of the 1st Serial number
[Adaptation - 10] -> Channel 48 Set to 255
Reset MMISet Audi Parking System Switch-Off Speed
Adjust the speed at which the Audi parking system automatically deactivates, customizing its behavior in various driving scenarios.
VCDS Code:
[10 - Park/Steer Assist] [Adaptation - 10] -> Channel 23 Set to 20 (max value in km/h)Set Custom ADS (Audi Drive Select) Settings
Fine-tune your Audi Drive Select (ADS) modes by setting specific presets (Comfort, Auto, Dynamic, Individual) for a more personalized driving experience.
VCDS Code:
[09 – Cent. Elect.][Security Access - 16]
[Adaptation - 10] -> Channel 63 Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
[Adaptation - 10] -> Channel 64 Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
[Adaptation - 10] -> Channel 65 Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
[Adaptation - 10] -> Channel 66 Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
*Note all four channels needs to be set to the same value.*System & Module Adjustments
These modifications involve adjustments to various vehicle systems and modules.
Enable Hidden Menu in MMI
Access the hidden green menu within your MMI system for advanced diagnostic and configuration options. Use with extreme caution as incorrect changes can affect vehicle functionality.
VCDS Code:
[5F - Information Electr.] [Adaptation - 10] -> Channel 6 change 0 to 1
*Use this hidden menu at your own risk. Caution: Keep away from the "Bootloader"*Enable Import CDs to MMI’s HD
Enable the ability to import CDs directly to your MMI’s hard drive for convenient media storage.
VCDS Code:
[Hidden menu] Main/Diagnose/Settings Import Media Set to 4 of 4 "Copy/Ripping"Enable Independent Fog Light Control with High Beams
Gain independent control over your fog lights, allowing them to remain illuminated even when high beams are activated.
VCDS Code:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0
Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0Set Headlight Washer Duration & Cycles
Adjust the duration and number of cycles for your headlight washers to optimize cleaning performance and fluid usage.
VCDS Code (Duration):
[09 – Cent. Elect.] [Security Access - 16]
[Adaptation - 10] -> Channel 6 change to e.g. 500VCDS Code (Cycles):
[09 – Cent. Elect.] [Security Access - 16]
[Adaptation - 10] -> Channel 26 change to e.g. 10Adjust Consumption in DIS
Calibrate the fuel consumption display in your DIS to match real-world fuel economy more accurately.
VCDS Code:
[17 - Instruments] [Adaptation - 10] -> Channel 3 change 100 to xxx (see samples below)
Sample 1 - Calculation based on volume per distance (e.g. l/100km):
DIS: 9,3 l/100 km. Real: 9,8 l/100 km. (100 * 9,8 / 9,3 = 105,38)
Channel 3 will be changed from 100 to 105
Sample 2 - Calculation based on distance per volume (e.g. MPG):
DIS: 23 MPG. Real: 24 MPG. (100 * 23 / 24 = 95,83)
Channel 3 will be changed from 100 to 96Adjust LED Brightness
Fine-tune the brightness of your LED DRLs or other LED lighting elements to your desired level.
VCDS Code:
[09 – Cent. Elect.] [Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation - 10] -> Channel 3 Set between 5 and 100Set Automatic Transmission Start Mode
Customize the default start mode of your automatic transmission (D or S) to match your preferred driving style.
VCDS Code:
[09 - Cent. Elect.] [Security Access - 10]
[Adaptation 10] -> Channel 64 - Stored Value = 218 = Starting mode is always D
Channel 64 - New Value = 00; Starting mode is determined by ADS selection at engine shutdown (Comfort and Auto=D, Dynamic=S, Individual=whatever you pick)
Channel 64 - New Value = 03; Starting mode is always S regardless of ADS selection at engine shutdown (opposite of stock)
Channel 64 - New Value = 11; Starting mode is S with all ADS settings at shutdown except Comfort where it's D
Channel 64 - New Value = 19; Starting mode is S with all ADS settings at shutdown except Auto where it's DDisclaimer
This information is compiled from various online forums and resources related to Audi VCDS modifications. While every effort has been made to ensure accuracy, always double-check the coding instructions and proceed with caution when making changes to your vehicle’s settings. We are not responsible for any issues arising from the use of these modifications. Perform these modifications at your own risk.
Enhance Your Audi Experience Today
With Audi OBD2 VCDS, you have the power to personalize your vehicle in ways you might not have thought possible. Explore these modifications and unlock the hidden potential of your Audi. Enjoy the journey of customizing your car to perfectly match your needs and preferences!
