Using Veepeak OBD2 Adapter with the BimmerCode App: A Quick Guide

For BMW and Mini enthusiasts looking to unlock hidden features and customize their ride, the BimmerCode app is a powerful tool. To get connected and coding, you’ll need a reliable OBD2 adapter, and the Veepeak OBDCheck BLE or BLE+ is a popular and compatible choice. This guide will walk you through the simple steps to connect your Veepeak OBD2 adapter with the BimmerCode app on both Android and iOS devices, so you can start personalizing your BMW or Mini in no time. Remember to check adapter and vehicle compatibility at https://bimmercode.app/cars before you begin.

Connecting Veepeak OBD2 with BimmerCode App on Android

Setting up your Veepeak OBD2 adapter with the BimmerCode app on your Android device is straightforward. Follow these steps to establish a stable Bluetooth connection:

1. Begin by plugging your Veepeak device into the OBD port. This is usually located in the driver’s side footwell area. Once plugged in, turn on your car’s ignition to power up the adapter.

2. To ensure a smooth connection, disconnect any existing Bluetooth connections to your car’s iDrive system or other devices. Interference from other connections can sometimes prevent successful pairing.

3. Activate Airplane mode on your Android phone. This might seem counterintuitive, but it helps to clear any potential network interference and streamline the Bluetooth connection process.

4. Now, turn Bluetooth back on while still in Airplane mode. This isolates the Bluetooth signal and prepares it for pairing with the Veepeak adapter.

5. Navigate to your Android phone’s Bluetooth settings. Look for available devices and pair with “VEEPEAK”. This will establish the initial Bluetooth link between your phone and the adapter.

6. Open the BimmerCode app on your Android device. Go to the app’s Settings menu, typically found in the top corner or side navigation.

7. Within the BimmerCode app settings, locate the adapter type selection. Choose “Veepeak OBDCheck BLE/BLE+” from the list of available adapters. This tells the app which device to communicate with.

8. Finally, return to the BimmerCode app’s start screen and tap “Connect”. The app will now use the Bluetooth connection you’ve established to link with your Veepeak OBD2 adapter and your car, ready for coding.

Connecting Veepeak OBD2 with BimmerCode App on iOS

For iPhone and iPad users, connecting the Veepeak OBD2 adapter to the BimmerCode app requires a similar, yet slightly adjusted process to ensure seamless communication:

1. Start by plugging the Veepeak adapter into your BMW or Mini’s OBD port, situated in the driver’s side footwell. Turn the ignition to the ‘on’ position to power up the adapter.

2. Enable Airplane mode on your iOS device. As with Android, this step minimizes potential interference and focuses the device on the necessary Bluetooth connection.

3. Turn Bluetooth on again while Airplane mode is still active. This prepares your iOS device to specifically connect with the Veepeak adapter via Bluetooth.

4. It’s important to turn off Wi-Fi on your iOS device. Sometimes Wi-Fi can interfere with the initial Bluetooth connection process for OBD2 adapters.

5. Disable CarPlay in your iOS settings. Go to “Settings” > “General” > “CarPlay”. Select your car if it’s listed and choose to “Disable CarPlay”. CarPlay can sometimes conflict with OBD2 adapter connections.

6. Disconnect your iOS device from the car’s iDrive system within the car’s settings. Navigate to “COM” > “Mobile devices” > Select your device > and choose “Disconnect device”. This ensures a direct connection to the Veepeak adapter.

7. Disconnect any other Bluetooth devices that might be connected to your iOS device. This reduces potential conflicts during the connection process.

8. Keep your iOS device as close as possible to the Veepeak adapter during the connection process. A shorter distance improves signal strength and connection reliability.

9. Open the BimmerCode app on your iOS device and go to the settings menu. Select “OBDCHECK BLE or BLE+” as the adapter type to inform the app of the adapter you are using.

10. Tap “Connect” on the start screen of the BimmerCode app. The app will now attempt to connect to your Veepeak OBD2 adapter via Bluetooth, establishing the link needed for vehicle coding.

By following these steps for your respective device, you’ll be well on your way to using the Veepeak OBD2 adapter with the BimmerCode app to explore the customization possibilities for your BMW or Mini. For further details and troubleshooting, you can always refer to the Apps Guide Page.