The Autel HT200 OBD2 scanner is a popular tool for car diagnostics, often praised for its user-friendly interface and ability to read and clear codes. However, some users are encountering frustrating issues, raising questions about whether the Autel HT200 OBD2 is ultimately a good or bad investment. One recurring problem reported by users revolves around disconnecting the device from the vehicle’s OBDII port.
One user detailed a concerning experience where, after using the Autel HT200 to read and clear codes, their car would not start upon disconnecting the device. Following the recommended procedure of exiting diagnostics within the app and then disconnecting the Bluetooth dongle, the user still faced this starting issue. The only workaround found was a hard reset – disconnecting and reconnecting the car battery. This is far from ideal and contradicts the manual’s warning about potential ECM damage if communication is disrupted improperly.
This experience raises valid concerns about the Autel HT200’s disconnection process. While the tool offers benefits like live data monitoring, this significant drawback can overshadow the positives. The user also reported unsatisfactory tech support, with long hold times and unhelpful responses, further adding to the frustration. While the Autel HT200 offers convenience for quick diagnostics, these disconnection problems and lack of support contribute to a mixed user experience. Whether the Autel HT200 OBD2 is “good or bad” seems to heavily depend on whether these critical disconnection issues can be reliably resolved, ensuring smooth operation without causing further vehicle problems.
